There are two ways to customize furniture. One is to make furniture for woodworking site, the other is to customize furniture factory for specialization. Is the factory customized or the carpentry site done well? Or is it better to buy finished furniture? Today Nanning Furniture Customization Factory gives you a comparison!

Edge sealing

Woodworking furniture: This is the permanent pain of woodworking wardrobe, can not be perfectly solved, not only the surface unevenness affects the beauty, but also not tightly fit, environmental concerns.

Customized furniture: This is the strength of the machine cabinet. Super pressure combined with German environmental glue can achieve very beautiful effect. The texture and color of the edge seals are rich and can be integrated with the cabinet body. More beautiful and environmentally friendly.

Board

Particleboard, MDF PK fingerboard, woodworking board

In addition to a few high-end solid wood furniture customized, most of the customized furniture manufacturers generally use particleboard, medium-fibre board and multi-layer board as the base material to customize furniture, while woodworkers generally use eco-board, finger joint board.

Why don't solid wood particulate boards be used in woodworking? In woodworker's eyes, solid wood granular board is slag, which is very poor and falls off grade. Why do many decoration woodworkers say so? Because their handicraft machines can't make cabinets on site with solid wood particulate boards! When a saw goes down, the edge of the board will burst, and when the board bursts, it will be discarded, while woodworking boards, fingerboards and manual mechanical operation will at least not burst the edge.

So in woodworkers'eyes, woodworking boards and fingerboards are their treasures. Eighteen kinds of martial arts depend entirely on them. Can you dislike them? Particleboard is like a beautiful lady in the city, dressed in beautiful clothes, full of foreign air, spleen, need good service. Brittle particleboard must have factory machinery to saw well (e.g. electronic cutting saw). This good sawing effect is the key to good edge sealing.

Veneer

Woodworking furniture: Usually a large number of glue will be used for bonding, smoothness and glue environmental protection is easily overlooked, their own cabinet to pay special attention.

Custom Furniture: Glue is also used, but the quality of glue can be understood from the certificate, also need to pay attention to the licensing cycle.

Manufacturing process

Woodworking furniture: Make furniture on site, even if the sample you see is OK, but the furniture craftsmanship precision of your home may not be in a grade at all. Because the on-site production depends entirely on the woodworker's craftsmanship.

Customized Furniture: Factory production, due to the requirements of a certain capacity and processing quality, generally using large machinery to complete production. Therefore, the product has high precision, good edge binding force and beautiful appearance, and high installation accuracy.

Environmental issues

Woodworking Furniture: Furniture made on site uses a lot of urea-formaldehyde glue in the interior of woodworking boards. The content of formaldehyde is relatively high. Because its product structure is glue and nails, and a lot of glue is needed in processing. Most of the glue used exceeds the standard of formaldehyde, so the furniture made on site is extremely unprotected. Especially when the owner is present, in order to show that there is no jerry-building and material reduction, the knot made on In fact, may also say to you, "give you more glue," do not know that such furniture formaldehyde content made a higher grade.

Customized Furniture: Because the state has mandatory environmental protection standards for wood-based panels, the national standard is to reach the level of E1. However, the environmental protection of furniture is not limited to the requirements of environmental protection of wood-based panels. For example, the board can reach the level of E1, but in the secondary veneer processing, sealing glue problems are not well controlled, will still cause furniture formaldehyde exceeding the standard. Some fast-updating manufacturers generally use EO grade plates, and the starch glue from plants is also used to control and ensure the total release of formaldehyde.

Move

Woodworking furniture: generally fixed with round nails, can not be disassembled, because disassembly will lead to destructive damage to the cabinet and back, affecting the re-use of cabinet.

Customized furniture: mostly fixed with fasteners, removable, when the size of the removal environment does not match, you can adopt local board modification, patching and other ways to adjust the local.

On-site management: There is no problem of on-site production in factory customization, just install it directly when the decoration is basically completed. Because it uses special connectors to connect, now the installation is relatively simple and fast. And customized furniture also has an advantage that it can be disassembled, expanded functions and add-subtract configurations.

Overall effect

Factory customized furniture can be very beautiful and pleasant because of the use of formed sheets, clear lines, color and moisturization, and no need for late paint. Scientific mechanical design also ensures the stability and durability of the cabinet. Customized furniture will be more and more popular among young people and environmentalists because of its simplicity and generosity, environmental protection convenience, low price and good quality, and will be highly respected for a long time in the future. At present, in the overall customized furniture industry, manufacturers have developed their own product sales design system. Before ordering products, they can provide the overall furniture installation effect map for the owners free of charge according to the owner's size and personality requirements. The real thing is to see the effect of their own products before buying!

After sale

Woodworking furniture: Most of the decoration teams are usually finished without a shadow, basically no after-sales, decoration companies will generally carry out after-sales service, but most can not be timely.

Custom Furniture: Generally speaking, it is more guaranteed during the warranty period, but the time also needs a cycle, generally within 48 hours.

Firmness of furniture structure

The design of factory customization has taken into account solid problems, whether in theory or in practice, combined hardware company